Product Overview
Specifically engineered for aggressive chemical fluid conveyance systems, our teflon lined pipe products serve as essential process piping connected directly to core equipment such as graphite heat exchangers, reactors, and storage tanks. Utilizing high-grade metal as the pressure-bearing outer shell, available as ptfe lined carbon steel pipe or ptfe lined stainless steel pipe, our ptfe lined pipes are inner-lined with polytetrafluoroethylene (PTFE) and premium fluoroplastics. This design perfectly combines the mechanical structural strength of steel with the absolute chemical inertness of fluoropolymers, providing an uncompromising solution for conveying hydrochloric acid, sulfuric acid, phosphoric acid, mixed acids, strong alkalis, and severe oxidizing media.
Authoritative Execution Standards
-
Piping Standard: Manufactured in strict compliance with GB/T 26500-2025 (Structural Types, Main Dimensions, and Basic Parameters of Plastic-Lined Composite Steel Pipes and Fittings, applicable to straight pipes from DN15 to DN1200).
-
Negative Pressure Testing: Vacuum resistance inspection of the internal lining layer strictly follows GB/T 23711.4-2019 standards.
Core Product Matrix (Straight Pipes Only)
-
Straight Teflon Lined Pipes (PTFE Lined Pipes)
-
Shell Options: ptfe lined carbon steel pipe (cost-effective standard) and ptfe lined stainless steel pipe (304 / 316L for hygienic or external corrosive atmospheres).
-
Lining Material Options: PTFE, PFA (Perfluoroalkoxy), FEP (Fluorinated Ethylene Propylene).
-
Manufacturing Processes & Application Matching:
-
Isostatic Molding Process: Specially developed for high vacuum ($\le -0.098\text{ MPa}$), high permeation, ultra-high purity, and severe thermal cycling. Features a dense, seamless lining structure.
-
Tight-Lined Pressing Process: The cost-effective choice for conventional strong acid conveyance, suitable for temperatures $\le 120^\circ\text{C}$ and micro-negative pressure conditions.
-
Steel-Mesh Reinforced Process: Embedded with a wire mesh skeleton inside the liner to withstand high vacuum, pressure fluctuations, and collapse-prone suction piping systems.
-
-
Performance Boundaries & Critical Selection Factors
Procurement failures often stem from ordering teflon lined pipes based solely on nominal dimensions. Before production, our technical engineering team helps verify key operational limits:
-
Temperature & Material Boundaries:
-
PTFE: $-20 ℃ to 200 ℃ (broadest chemical resistance, cold flow mitigation required).
-
PFA: $-20 ℃ to 180 ℃ (ultra-high purity, low ion leaching).
-
FEP: $-20 ℃ to 150 ℃(melt-processed lining with zero pinholes).
-
-
Negative Pressure & Vacuum Boundaries: Tight-lined ptfe lined pipes can handle micro-vacuum at ambient conditions, but vacuum resistance decreases at elevated temperatures ≤120℃ . For continuous high-vacuum lines ≤-0.098 MPa , isostatic molded or steel-mesh reinforced teflon lined pipe structures must be specified.
-
Permeability & Cold Flow Controls: Highly penetrating acids (e.g., HF and hot hydrochloric acid) require dense isostatic PTFE/PFA liners rather than standard extruded grades. To address PTFE cold flow (creep) at flanged sealing points, we design heavy-duty stub ends with locked bases and provide cross-pattern torque tightening protocols.
-
Slurry & Particle Handling: For corrosive slurries containing solid particles, steel-mesh reinforced straight teflon lined pipes are strongly recommended to prevent premature abrasion of the lining wall.
Typical Application Fields
-
Process piping systems connected to graphite heat exchangers and absorption columns
-
Chlor-alkali, pesticide, and pharmaceutical intermediate acid transport lines
-
Hydrometallurgy and rare earth solvent extraction fluid lines
-
Waste acid recovery and flue gas desulfurization piping
-
Electronic-grade reagent and high-purity chemical conveyance systems
Engineering Customization & Technical Support
We supply both standard spool pieces and fully customized teflon lined pipes:
-
Custom Fabrication by Drawings: Manufacturing custom pipe spools, non-standard lengths, and specific flange configurations based on engineering isometric drawings.
-
Application Engineering Verification: Our technical team verifies media concentration, operating temperature, vacuum levels, and flange standards to optimize your teflon lined pipe selection and ensure zero leaks across your plant’s piping network.







Reviews
There are no reviews yet.